Xantech IR Quick Connect (3.5mm) Retail Packages Accessories |
Affordable, reliable IR Control Solutions....... |
|
Dinky Link | Micro Link | Hidden Link |
Purchase All Dinky Link Kits | Purchase All Micro Link Kits | Purchase All Hidden Link Kits |
| | 
|
Standard | Standard | Standard |
480BKIT Black or 480WKIT White | 490KITRP | 291KITRP |
LCD PROOF Use when LCD Displays or direct sunlight / compact fluorescent lights are present. LCD displays emit light wavelengths that interfere with IR carrier frequencies. Xantechs exclusive adjustable frequency range eliminates this problem. |
LCD Proof | LCD Proof | LCD Proof |
48085BKITRP Black or 48085SKITRP Silver | 49085KITRP | 29180KITRP |
PLASMA PROOF Use when Plasma Displays or direct sunlight / compact fluorescent lights are present. Plasma displays emit infrared light that interferes with IR controls. Xantech invented a filter that eliminates this IR interference. |
Plasma Proof | Plasma Proof | Plasma Proof |
48095BKITRP Black or 48095SKITRP Silver | 49095KITRP | 29195KITRP |
IR Control over COAX Kits |
17294RP |
| |
Do you own an existing Xantech Kit and want to upgrade to a Plasma Proof Receiver? Link here |
| |
Xantech IR Expansion, IR Emitters, Power supplies |
| IR Products Xantech 079144 AMPLIFIED CONNECTING BLOCK |
Emitter ports with jumpers permit high or low power
High-speed opto-isolator for improved operation
Parallel emitter ports drive 10 single or 10 dual emitters
Contains red LED input signal Test-IR
Uses either the 781RG or 782-00 power supply (The 781RG is included with all online kit & available below)
Dimensions: 6 x 2 1/4 x 15/16 (153mm x 58mm x 24mm)
Up to nine 079000s can be connected to the 079144 if more than
_10 emitter ports are needed
STATUS terminal for connection of Xantech IR Receivers and Keypads that have status
_indicator LEDs
Quick connect stereo mini jack for Xantech IR Receivers that use a stereo mini plug |
|
| Xantech 781RG 12V DC POWER SUPPLY |
 | Regulated 12V DC for most Xantech remote control devices (marked rating is 12V DC,
_ 200 mA)
Powers basic Xantech IR systems
Uses 2.1mm coaxial plug
Top |
|
CAUTION: DO NOT plug emitters into the IN/OUT or HIGH OUT jacks on the 790-00 and 791-44 Connecting Blocks. To do so will destroy the emitters! |
If you need to extend the IR emitter cable length - use the 50' Xantech accessory item - 784-00. If you need to extend the IR RECEIVER (7' cable length)- You must "snip" the quick connect end off and use a shielded 3-condutor wire. Gauge of cable required depends on how far you wish to extend the receiver from the connecting block. | | Xantech 282M IR MOUSE EMITTER The 282M Mouse Emitter contains a tiny infrared LED housed in a miniature, mouse shaped, black appearing, injection molded plastic shell. It emits IR (infrared) control signals sent to it by IR receivers or other Xantech controllers. Manual The 282M can be installed directly on the IR sensor window of the controlled device or other suitable location. |
 | Non-visible, high-output version
Deep purple Lexanฎ shell
Improved clear adhesive film for attachment to IR window of controlled component
Two 1/2 pieces of double-sided clear adhesive tape included for replacement.
Lead is terminated with a 3.5mm mono mini plug
Length of wire: 10 feet
|
|
| Xantech 283M BLINK-IR MOUSE EMITTER The 283M visible mouse emitter will also indicate the presence of stray IR or RF interference by randomly blinking when no IR control signal is being sent. Reposition the IR receiver or the interfering source to eliminate or reduce the random blinking. The more the random blinking is reduced, the better the system will function. ManualThe 283M is designed to be installed directly on the IR sensor window of the controlled device. |
| Visible, low-output version of the 282M
Improved clear adhesive film for attachment to IR window of controlled component
Two 1/2 pieces of double-sided clear adhesive tape included for replacement purposes
Lead is terminated with a 3.5mm mono mini plug
Length of wire: 10 feet
|
|
| Xantech 286M DUAL BLINK-IR MOUSE EMITTER Controls two devices while taking up one connecting block space. The 286M visible mouse emitter will also indicate the presence of stray IR or RF interference by randomly blinking when no IR control signal is being sent. Reposition the IR receiver or the interfering source to eliminate or reduce the random blinking. The more the random blinking is reduced, the better the system will function. Manual |
The 286M is designed to be installed directly on the IR sensor window of the controlled device.  | Two emitters in series with each other and terminated in a single 3.5mm mono mini plug
Length of wire: 7 feet to junction, 3 feet to each emitter
Top |
|
If you need to extend the IR emitter cable length - use the 50' Xantech accessory item - 784-00. If you need to extend the IR RECEIVER (7' cable length)- You must "snip" the quick connect end off and use a shielded 3-condutor wire. Gauge of cable required depends on how far you wish to extend the receiver from the connecting block. | Xantech 078400 EMITTER EXTENSION CABLE
|
 | 50-foot, 24-gauge, 2-conductor cable. Use for long emitter runs
3.5 mm mini mono plug on one end and female mini mono jack on the other.
Top |
|
Xantech Upgrade existing Xantech IR system to a Plasma Proof IR Receiver |
Xantech IR Receivers require 3 conductor cable for extension.
24 gauge- up to 200' 22 gauge up to 600' 20 gauge up to 2000' 18 gauge - up to 5000' |
Xantech 29195 Plasma Proof HIDDEN LINK IR RECEIVER
 Designed to work with plasma displays - Place on shelf-top or cabinet near TV
Compact package: 3 1/4 x 1 x 2 (83mm x 26mm x 51mm)
Talkback LED for system tests IR input bandwidth: 30 - 100 kHz
Nominal reception range: > 50 feet US Patent Approved
|
Xantech Dinky Link Plasma Proof IR Receivers
48095S SILVER PLASMA PROOF DINKY LINK
48095B BLACK PLASMA PROOF DINKY LINK
48095W WHITE PLASMA PROOF DINKY LINK |
 Designed to work with plasma displays - Attaches discretely to front of TV
Extremely small package, 7/16 x 5/16 x 2-1/8 (11mm x 8mm x 54mm)
Talkback LED for system tests IR input bandwidth: 30 - 100 kHz Nominal reception range: > 50 feet
US Patent Approved
Top
|
Xantech 49095 PLASMA PROOF MICRO LINK IR RECEIVER Designed to work with plasma displays - Peephole-Style installs in cabinet doors or walls
Dimensions: 3/4 (19mm) diameter, 2 (51mm) deep
Talkback LED for system tests
IR input bandwidth: 30 - 100 kHz
Nominal reception range: > 50 feet
US Patent Approved
Includes Brass, White and Black bezels
|
Top |
Wireless IR Remote Solutions Use where you can't run a cable -(security camera) |
- Controls virtually any I/R remote operated household device from anywhere in the home
- Operating range of up to 150'
- Converts I/R signal from a standard remote into a long-range RF signal
- Uses 418 MHz frequency band to command components through any obstacle including walls and floors
- Works with satellite receivers, VCRs, CD players, stereo receivers, tape decks, etc
- Includes extension unit and I/R receiver
- Model LF-IRX For the Home
- $46.95 each
| 
|
|
Top |
